Ryandor.com

Forums
It is currently Sun Dec 01, 2024 12:27 pm

All times are UTC - 7 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Sun Aug 11, 2002 5:42 am 
Offline
Site Admin
Site Admin
User avatar

Joined: Sun Jun 02, 2002 8:01 pm
Posts: 1473
Location: CO, USA
I've decided to post the tutorial to the forums. I've gone through and edited for grammar and added to some sections. It's not finished, of course, but now if you have a question about the tutorial you can reply to this post.

PLEASE NOTE: There are no images in here. As I place each section into it's own FAQ, I'll put images in there. If you download the pdf version of thi, it will have images. I highly recomend that.

Table of Contents

Introduction
A: License
B: Information
C: Contact
1. Getting Started and requirements
2. Basic Layout
3. Basic Terrains
A: Grass
B: Forest
C: Swamp
D: Desert
E: Jungle
4: Advanced Terrains
A: Mountains
B: Mixed terrain
C: Rivers in Terrain
D: Grass "cliffs"
5. Dungeons
6. Towns and Roads
7. Underground: Caves and Basements
8. Random Statics
9. How to use Dragon
10. How to use DragonSP
11. Customizing Dragon
A: Color Table
B: Scripts
12: Creating a map without Dragon
A: UOConvert
B: UOCoast
C: Transition
D: ItemPlacer
E: UOCopy
F: Cartograph
G: WorldForge
H: MulTool

Appendix A: Links and Acknowledgements
Appendix B: Dragon Script Definitions
Appendix C: Notes



Introduction

A: License
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with no Invariant Sections, no Back-Cover Texts, and one Front-Cover Text: "Original Map Making Tutorial conceived and created by Justin Watson (Ryandor) 2001, 2002". A copy of the license is available at http://www.gnu.org/licenses/fdl.txt

What this means is if you want to copy, upload, change, or do just about anything else with this tutorial, just give me credit near the top. I'd appreciate it.

B: Information
This tutorial is starting to include other things besides Photoshop and Dragon. Great! The more information it includes, the better. Eventually this will be covering alternative methods of creating custom maps, as well as other useful information for all aspects of world building.

C: Contact EDIT
If you'd like to contribute, I would be most grateful. Any contributions will be given full credit. If you have any questions or comments regarding this (or anything related, for that matter) you can contact me (or others) via the forums here.



1. Getting Started and requirements
This tutorial is aimed at using Photoshop 5.5. That's what I have. If you use Paint Shop Pro or anything else, then you'll have to find the equivalent commands yourself. Sorry. Additionally, I assume you have at least some basic knowledge of how Windows and Photoshop work. If you have questions on a specific step, feel free to contact me. Comments will be added as necessary.

Things to Note:
Color Table
Each colored square represents the tile type that it will paint. The number inside each square is the altitude (Z) of that tile type. If you draw with "Grass 10" then that spot will be grass tiles at 20 Z. When I want to refer to a particular terrain type, I will refer to it as "<Type> <altitude>". Example: "Grass 20"
Commands
When I need to refer to commands in the program, I will use a bold font.
Example: File -> Open
Tutorial Kit
I was at one point going to create this, however, I've integrated it into Mod 9. Custom actions and brushes are about the extent of it.

There are several ways you can get started with creating the initial bmp. The first, and easiest, is to open "example.bmp" in whatever paint program you are using. You can find this in the /dragon/addon/fullmap folder. You could also open "colortable-mod9.bmp" found in the /dragon/addon folder, then resizing it to the correct dimensions (6144 x 4096), Make sure you do a "Save As..." to a new file name so you don't loss the original color table.

The second method required Photoshop 5.0 or greater. I've made a custom action that will make the initial map for you. Read the "readme-mapab.txt" in the /dragon/addon folder for detials on installing and using.

The third way is also using Photoshop. I use version 5.5 so the command are specific to this version, however, other versions should be similiar, if not the same.
Open Photoshop and create a new document. Set the dimensions to 6144 x 4096 pixels, resolution to 72 pixel/inch, mode to RGB, and white background.
Once created, change the document to Indexed Color:
Image ->Mode -> Indexed Color...
Set the Palette to Custom. It will open a new window for picking colors. Hit Load, and browse to the /dragon/addon folder. The file you should open is "colortable-mod9.aco" Hit OK twice, and wait for Photoshop to convert the new document.

However you create the initial bmp, it's a good idea to open the "colortable-mod9.bmp" to use as a reference for picking colors. Of course method two, above, you've already got it there. Once it's open, use the color picker tool to select the color you want based on what you are drawing. The color table is laid out by what kind of terrain you want. For example, look at the first row "grass". The whole row in this case (expect the last one) is for grass. Each square represents the altitude (Z) of the grass.
This is all you need to get started with creating a new map from scratch. Pick a color, pick a brush, and start drawing. I recommend doing a flood fill with "water -5" to start, unless you've run the actions. Using grass to paint the "continents" and "islands" is a good start, then filling in the details of mountians (rock), forest, sand, etc. When you need to take a break, make sure you "Save a copy" and save it as a bitmap (.bmp). The file size should show up as 24,578KB in Windows. I also recommend making backups as you go along. This way, if you change your mind on something, you can revert back to a previous version as needed.



2. Basic Layout
Unless you've used the actions to create the initial bmp with water and dungeons, you should flood fill the whole map with "Water -5". If you plan on having dungeons, fill the right side (X>5119) with "Black 0" to make sure you don't put anything there for now. The correct size of the flood fill for the dungeons area is illustrated below:

insert image here


3. Basic Terrains
A: Grass
Now that you have the file for the map created and the water and dungeons set, it's time to start drawing. For the first island you draw I recommend "Grass 0" to get the basic shape down. Creating a "natural looking" island is beyond this tutorial, so use your best judgment on what *you* think looks good. Pretty much what you draw is what you will get in the map.
Make a hill: pick the color "Grass 5". Draw an area on the island you made. You now have a small hill. Pick "Grass 10" and paint a smaller area in the same spot. Your hill just got higher. I think you get the picture. Grass is pretty basic.
B: Forest
Same as grass, except pick "Forest 0", etc.
C: Swamp
Swamp is considered (by me) a basic terrain type, but there is one simple rule. You must have swamp surrounded by grass. Dragon is unable to place transition tiles for swamp to anything except grass. The reason for this is there are not any other transition types available for swamp. Make sure you place at least 2 tiles of grass around the swamp, as this is needed for Dragon to properly calculate the transition. As part of the mod, there is a transition for swamp to forest. If you put "Forest 5" (or higher) around the swamp, you'll get a "cliff" effect around the swamp.
D: Desert
Same as grass.
E: Jungle
Same as grass.
F: Things to note
One of the most important things to remember when painting is to make sure that there are no "single" pixels of one color that go into another. The reason for this is because of the way Dragon calculates the transitions. If you have (for example) just one pixel of grass going into a sand area, it will not put a transition there. Here's what it will look like:

insert image

4: Advanced Terrains
A: Mountains
Mountains can be tricky but once you get the technique down, it will go quickly.
There are a couple of actions that I setup in Photoshop that aid in making them. This method is what I use to get "OSI type" mountains. I think they look pretty good.
First, using "Rock 20", draw the outline of the mountains on the map, and flood fill it so it is one solid shape. Select the "Magic Wand" tool from the Toolbar. Set the Magic Wand tool options to "Contiguous" and set the Tolerance to 0. Select the "rock" you just painted. Now, either hit F2 (for the action I set up for "Contract Selection") or from the menus:


"Select -> Modify -> Contract..." Set the contraction to 1.

insert image

The selection will contract by one pixel around the border. Use the color picker to select "Rock 30". Select the "Fill" tool and fill the selection. Contract the selection by 1 again. Pick "Rock 50" and fill again. Contract the selection by 1 again. Pick "Rock 60" and fill again. Now, pick "Rock 65" but pick a brush with a random pattern and paint randomly in the selection. Pick "Rock 70" and repeat. The 65 and 70 will put the "random peaks" into the mountians.

insert image


Do this as many times as you like, but I would not recommend over 80 in small spots. (OSI mountains are generally in the 60 - 70 range). You will notice as you paint the higher numbers, it will start to take on the randomness of mountains. Once you get the hang of this, turn off the "Contiguous" mode on the magic wand and fill tools, and you can do the entire map at once.

Mixed terrain:
This is another technique that is difficult to master as well, but I consider this one of the hardest things to do as well. It requires paying attention to what you are doing and remembering (or writing down) what's where.

This can apply to many mixes, but I will do a grass hill with a line of forest going over the hill.

First the hill. Draw the hill using grass with different elevations. Remember the elevations you use and in which order. I usually stick to 5,10,15,20,etc, but you can use what ever elevations you want. Here's my hill:

insert image

Now, using the lasso tool, select the area where you want the forest to be:

insert image

Save the selection with "Select -> Save Selection..."Just save it to a new document. It will make a new document with black and white representation of the selection. Now, with the Magic Wand, subtract the areas that are part of the "hill". (Use ALT-click)

insert image

Using the "Forest 0" color and a random brush, paint in the areas of forest
(Close-up of area, since "Grass 0" and "Forest 0" are hard to distinguish)

insert image

Once you have "0" done, time to move on to "5". Deselect everything and load the selection you saved previously:
"Select -> Load Selection..."
Using the Magic Wand with Contiguous unchecked and Tolerance 0, subtract the "Grass 0" and "Forest 0" and all altitudes above 5:

insert image

Select "Forest 5" and using a random brush, paint in the forest for this altitude, matching your "breaking points" to align with the previous altitude. (Close-up again)

insert image

Do the same steps for altitudes 10 and 15 (the selection doesn't reach the altitude of 20 at the top of the hill in this case). When finished it'll look something like this:

insert image
(enhanced to show colors better)

That's it. This technique can be applied to other terrains as well. For example: Grass/Jungle, Forest/Jungle, Snow/Grass, etc.

C: Rivers in Terrain
Using "Water -5" draw the river where you want it. Then using the lasso tool, outline where you want the terrain to be. Deselect the water. Contract selection by at least 2 (to avoid problems with translation tiles for coast), and then fill with desired terrain (for example: if the river is in "grass 0", fill with "grass 5"). Contract the selection again and fill with the next terrain ("Grass 10" in this case). Repeat as necessary. Here is an example of this:

insert image

This is a river going through hills with random elevation spots and small forest areas. As you can see, I created the hill to make the rivers appear to "cut" into the hillside. Using the magic wand and lasso with contract achieves this effect. Then a random brush to get the random elevation.

D: Grass "cliffs"
This trasition is only possible using my mod. While the name "cliffs" may not be a true representation of the tile type, it's what I will refer to it in this tutorial. The word "bump" is used in the Dragon mod, and refers to the same thing.
First the colors:

insert image

The colors circled in red are the ones to be used for this effect. In order for them to work correctly, you must always use a lower number (z value) than an adjacent grass color (circled in blue). For transitions to other tile types and colors, the normal rules apply as for grass.

insert image???

Putting it to use (an example):

insert image

For this example I want a "low area" along the coast of this map I'm making:

insert image

First, I'll add the new color for the low area using "grassbump 0"

Now, for the important part. Since the original grass needs to be at a higher z (altitude) than the grassbump, I need to make the original grass higher. I'll put a gradient for the hill to make it look good.

insert image???

To finish it off, I'll add some little hills with in the low area, to give something to look at in game.

insert image

Here's the final map section with labels indicating tile type.

insert image???

Here is what it will look like in game:

insert image

5. Dungeons
The creation of dungeons is a bit different. Most of a dungeon is made with statics, so the only major work in Photoshop will be the floors for the passageways and the rooms. It helps to draw out the basic design on paper first so you can remember where the walls are going to be. I have found that when creating dungeons that will have stairs, it is best to leave a one or two tile gap where you will have the stairs. Use the appropriate "black" level to fill the gap. Some of the tile types in Dragon will create the outside walls of the dungeon.

If you use "cave" you will get cave walls already filled in. If you use floorplates (certain ones), you'll get dungeon walls.

6. Towns and Roads
Creating towns is mainly a static creation as well, but the floors and roads can be inclused as part of the map. The reasoning for doing this is once you have a completed map with many towns, you'll want to keep the static files size as small as possible. If the floors are included as statics, then the size will go up correspondingly. The map0.mul file size does not change regardless of what is in it. (This, of course does not take into consideration patching aspects.)
One feature of floor tiles in the map is that they do not stretch like the landscape tiles, so you can include them at any altitude with out worrying about surrounding tiles at different altitudes.

I would recommend not over doing the "custom build from scratch" type of buildings. You'll get burned out real quick. Use some OSI houses with minor tweaks for some buildings. It'll go faster and you wont get burned out. Just keep the style of houses similar in each area/town. I think for every large (10 x 10 in size) building you do, you should have about 3 or 4 smaller regular houses. Use the templates in Xuri's Worldbuilder to add generic houses. Go through the OSI map and extract houses you like.

If you use an OSI house, you can change the furniture and move the doors and windows and maybe add an extra wall inside to break it up, or take out a wall. When you place houses that are 2 and 3 stories high, don't place them too close together; otherwise your players will have lots of hiding places (unless you want that; great effect for an alley).

7. Underground: Caves and Basements
With my mod, you can create caves in mountains. When you draw a cave in a mountain, put a two tile (at least) border around it. Then, when you compile the map, you'll have the correct cave walls in the cave. Because it puts static cave tiles for the floor, you can then go into WorldForge and edit the map so that the cave area is now all mountains. Make sure you have an altitude of at least 20, otherwise you will not be able to walk around in the cave. Make sure you do this part last because if you have to re-run Dragon for any reason, it will reset the cave into the map. Combined with cave entrances, just a little bit of tweaking is required for caves in mountains.

Also with my mod, you can add "cave entrances" into a bmp for Dragon to convert for you. However, there is still some tweaking in WorldForge that has to be done for it to look good. Dragon does have limitations, and this is related to the main one; all transitions must have 2 tiles adjacent to create a smooth transition. Cave entrances technically have three tiles adjacent tiles, where the cave entrance meets the grass (or forest, etc.) Since there are no "3 tile translations", minor tweaking will be required for the "finished" effect of a cave entrance.
The other atlernate for cave entrances is with UOCopy or WorldForge, and this will actually get better looking cave entrances. To do this, load the OSI map and look for a cave entrance you want. Then, use WorldForge (or UOCopy) and copy it to where you want it in your custom map. The main drawback to this method is you must do it after you are done compiling the map with Dragon. If later, you need to re-run Dragon for any reason, you'll have to re-copy the cave entrances back into your custom map.

8. Random Statics
Take advantage of DragonSP to create statics for Forests, Jungles, Swamps and Deserts. I would not use the Grass statics though as it may interfere with town building. The scripts are easy to edit and are well commented so take a look at them in the /dragon/scripts/items folder. If there is a type of item you do not want, then comment it out (using "//" at the beginning of the line.) I've modified or used StormCrow's Modified scripts in my Dragon Mod. This allows for more options in the scripts.

9. How to use Dragon
First, when you run it, you'll have to wait 15 seconds. Hit OK.
The "BMP File" is for the bmp you created. Enter or browse the file name. Do not worry about the "Fix file". Leave it blank for now. An explanation of how it works is below.
The "MAP File" is what the BMP will be converted to. Make sure you have a map0.mul file in this path. Dragon cannot create a file from nothing. It needs to be able to overwrite a map0.mul. Make sure you are using a copy in case something goes wrong. I highly recommend that both the bmp file and the map file be located in the same folder as Dragon. There have been reports of Dragon not working correctly when they are elsewhere.
Hit the Config button. A new window will open. Here are the options:
Remove Statics Files: You want this to be checked. This controls the scripts that Dragon creates for static items. If you leave it checked, the next time you run Dragon, you will get either duplicate items (if the map is the same) or items in the wrong areas (if it's a new map).
HighPriority: This will make Dragon run just a little bit faster. When checked, the progress bar will not update and you can usually shave a few seconds off the compile time. On a 1Ghz computer with 512MB RAM, it is not noticeable. I have had occasional lockups with Dragon running in High Priority mode. Unless you've got a slow computer, leave it off. If you do use it, don't use other applications at the same time. Additionally, the amount of RAM you have can greatly affect the compile time. The more RAM you have, the better it will be. And, of course, the speed of your computer will affect it as well. I have compiled maps on a PII 233 with 144MB RAM. It took about 40 minutes. I currently use an AMD 1Ghz with 512 DDR RAM and it takes about 4 minutes to compile a fairly detialed map.
Sphere Statics or UOX Statics: This affects the scripts that Dragon creates. Check Sphere Statics. UOX Statics do not work correctly and are not supported. The scripts that Dragon generates is frozen with DragonSP, so no need to worry about what server you use. Once the statics are frozen, they will work on any UO emulator.
Hit OK to exit the Config screen.
Once you've gotten everything set up, hit the Start button in Dragon. Depending on your computer's speed and resources, it can take anywhere from 3 minutes to up to an hour. Be patient. It will inform you of its progress as it works.

The Fix File: This is used for overriding tiles in the map0.mul. You can use it if you've already edited the map with WorldForge but need to recompile the map with Dragon. You simply include a list of all tiles you want to be placed in the map instead of Dragon generating a tile. You can find an example fix file in the /dragon/addon folder. Put the x, y, z, and item id in this file and it will place that item at that location in the map.
NOTE: There is an error in how the fix file is used. The way in needs to be used it this:
X Y ID(dec) Z(hex)
The ID and Z values are swapped. So, say for example you wanted to add a lava tile at X 1000 Y 1000 with an elevation of 20, you would write: 1000 100 503 14
Note the ID number is in decimal and the z value is in hex. I'm sure that this is a mistake in the Dragon program.


10. How to use DragonSP
After you've run Dragon, you may notice it tells you to run DragonSP to freeze statics. That's how you do it.
When run, DragonSP will need the paths to your statics. (Use a copy of them just in case)
On the left side are all the types of statics that you can include. This list is a set of scripts that Dragon generates based on the last map you created with it. Select the types you want to include either with the mouse or the buttons underneath the list (don't worry about the search button). For DragonSP to work, you must select at least one scp file. Pick both Waterx2.scp and 2xWater.scp to include the coastlines. Other types should be obvious. Hit start. At one point it will ask to "Clear Current Statics?" Answer Yes. This will get rid of all the towns, forests, etc that are in the static files (staidx0.mul and statics0.mul). It will then put in the statics that you need based on the map. That's it really. If you don't answer yes to the "Clear Statics" question, it will leave the current statics in the file and add the new stuff in. This is useful for when you do the coastlines on the first run, and then you want to do other statics on a second run (forest, grass, desert, etc).
DragonSP only freezes coastlines, trees rocks, etc that are generated by the scripts that Dragon creates when converting the map. To freeze houses and buildings, you have to use a program that will freeze stuff in the items.wsc file. WorldForge, MulTool, etc do this.


11. Customizing Dragon
A: Color Table
This is an advnaced topic for those who want more control or different colors. To edit the color table to include other types of tiles, you need to edit maptrans.txt and groups.txt. Both of these are in the /dragon/scripts folder. Open both files side by side and you can see how they are laid out. The color table is a 64 x 64 grid, with each color belonging to a group. Dragon doesn't actually care about the colors that you use. It uses the index number of where the color is. However, practically speaking, it makes sense to match a color in the colortable.bmp (in the /dragon/addon folder) so that it is easier to visualize what you are drawing. Also, if you edit the maptrans and groups files, you should also edit the colortable.bmp so you can use the color picker to get the color easily. Once you've edited these files, you need to make sure that the actual color table of your bmp matches what you have in the txt files. In Photoshop: "Image -> Mode -> Color Table..." will get you to the right spot. I recommend saving the color table for future use so you can load it later.
B: Item Scripts
In the /dragon/scripts/items folder are the files that control what random statics are created. These are well commented and are easy to edit. See the above section on Random Statics.
For transitions, you can edit how the tiles are interpreted by editing the files in the /dragon/scripts folder. See Appendix B for more information
Transitions
These are controled from several folders under /dragon/scripts. They are a bit more difficult to edit, but following Appendix B you can get an idea of how they work. Also, KnightD has created a program called DragonAssist for helping with creating these.

12: Creating a map without Dragon
Here is a set of programs that you can use to create a custom map from scratch. It's a bit trickier than using Dragon, but can be done. Here is the list of programs you'll need:

UOConvert: used to convert a bmp made in MSPaint (or other paint program, but it has a "color table" designed for MSPaint) to map0.mul
UOCoast: Creates the water tiles for all the coast lines
Transition: Used to make transitions like grass/forest, snow/grass, etc
ItemPlacer: Used to place random trees, rocks, etc
Cartograph: Used to make the multimap.rle file for custom "in-game" maps (cartography skill)

All of these programs (and others) can be found at
http://www.eikon.tum.de/~isp/sphere/doc_index.html

WorldForge: Used to freeze the items that these programs create
WorldForge is available at www.uoxdev.com or at other sites

Additionally, UOConvert can "patch" a new area in the map0.mul if you've gone too far past the point of recompiling with Dragon.

Make sure you read the documentation that comes with these programs! It has more excellent information on how to use them.

A: UOConvert
UOConvert is a program that you can use to either create a new map with or to import a new section of map into an existing map0.mul. This can be useful if you've already created a map with Dragon but have either modified the map0 with WorldForge (and would loose your modifications) or just don't want to recompile the map.
I'll explain how to import a new section of map using UOConvert.
First thing to do is create a small map in MSPaint. I wouldn't recommend to large a bmp, since MSPaint is not designed for handling large files. The easiest way to make a map piece is to just use the colors that are there already. Use light green for grass, dark green for forest, etc. If there are areas that you do not want to overwrite, simply leave those areas blank (don't draw). This way it is possible to import areas that are not square. Once you have made a map (and saved it), open UOConvert.
When you run the program it will open up an empty window this some buttons and controls.
Either use "File -> Open BMP" or use the buttons to open the bmp you just made.
"File -> Open Translation" and open the file "test2.tuo" which should be in the UOConvert folder. This file is what the program uses to convert the colors you draw into the appropriate tiles on the map. Explanation of the controls:
Drop down list (initially it should say "Color 00"): This is the current color you are working with. All other controls are its properties.
Color: This is the hex id of the color for the current tile IDs.
Min Tile and Max Tile: These are the tile IDs that will be drawn based on the current color. Use InsideUO to see what the tiles are. For example, 0003 through 0006 represent the grass tiles. When the program converts and places the map piece in the map0.mul, any one of these tile IDs will be randomly picked and inserted into the map, based on the color.
Min Alt and Max Alt: This controls at which altitude (z value) the tiles will be placed. This is used to create a random landscape, as whatever values you choose will be randomly picked within this range for the tile.
Color Dropper: This is used for picking the color that will represent what tile the color will use. How it works: If a color is already defined, it will go to that color in the list, and you can change its properties (same as selecting the color from the drop down list). If the color is not defined it will overwrite the currently selected color based on the drop down list. I would recommend careful examination of the currently defined colors before using this. By default, the most common colors are included in the translation table.
Delete Entry: Deletes the current color in the drop down list.
Path to map0.mul: Put the full path to the map0.mul you want the bmp to be imported into. Make sure you are using a copy, in case it doesn't import how or where you like.
Top-left X and Top-left Y: This is where in the map you want the bmp to be placed when it converts. Remember, if you have white space (non-defined) areas in your bmp, it will not change the map in these areas. If the area has white space in the upper left corner, it will "offset" the bmp that you import.
"File -> Convert BMP" will commit your bmp to the map0.mul. Use InsideUO to see the changes it made.

B: UOCoast
This is used for placing all the water coast tiles into the map. When you run it, simply place the full paths to the map0.mul and items.wsc files you want to use. If you want to create coastlines for the entire map, then leave all the x y boxes alone. Otherwise put the area you want to work with into these boxes. Select the options you want in the check boxes, and hit "Create Coast"
Once it is done, you need to freeze the items into the static files with WorldForge or other appropriate program.

C: Transition
Coming Soon

D: ItemPlacer
Coming Soon

E: UOCopy
UOCopy is used to copy one part of a map to another. For instance, you want to use the OSI dungeons with your custom map. When you open UOCopy, You will see this:

insert image

As always, make backups of maps when using tools like this.
Source: These are the paths to the files you are going to copy from. For a map copy, the map0.mul path must be valid. For a static item copy, the staidx0.mul and statics0.mul paths must be valid.
Destination: These are the paths to the files you are going to copy to. For a map copy, the map0.mul path must be valid. For a static item copy, it will create the items.wsc file, and can be named whatever you want. Make sure a full path is entered in.
Copy Rectangle: Min. X, Min. Y, Max. X and Max. Y defines the rectangle in the source map that is going to be copied. The Off X and Off Y is the absolute offset from (0,0) of the copied rectangle in the destination map. The Off Z is the relative altitude offset (if the original altitude is 2, and Off Z is -5 then the altitude of copied tile or item is -3).
Copy Map (Button): This button will start the map copy.
Copy Statics (Button): This button will start the static item copy. Copied items are not directly added to a destination staidx0/statics0 file, but a file called "items.wsc" (by default, you can change the name) is created which includes all the items that were copied. You can use this file either to freeze the items with the programs Worldforge or MulTool or import it directly into SphereServer with the "import" command. You could also use this file as a worldfile for UOX (version .70x only) and edit it.
NOTE: UOCopy has recently been enhanced. It has the ability to copy from map2.mul to map0.mul and vice versa.

F: Cartograph
This is a tool for creating the "in-game" map when using the cartography skill. If you made a bmp of the map for Dragon, the best way is to use that map, convert it to black and white, shrink it, and run it though this program. This is a simple DOS based program, and has a readme file for it.
For best results, resize the bmp to 2560 x 2048, and change the color to 1-bit (black and white).
NOTE: This program has been fixed recently. If you downloaded the program before Feb 15, 2002, re-download it.

G: WorldForge
By far the best reference for using Worldforge is at Xuri's site.
Please go here: http://homefree.sensewave.com/~s107293/ ... orial.html

H: MulTool
MulTool can do a variety of things, but most useful for map making is Freezing and Clearing of Statics.


Freezing:
This is fairly simple to use. Simply put the full paths in the appropriate fields and hit "Freeze". If the "All" checkbox is marked, then everything is Froze. If not, the only the item type specified will be froze.

Clearing:
Again, simple. Fill in the full paths of the statics, put in the coordinates you'd like to clear, and hit "Clear".
As always, backups are a good thing.

NOTE These are the only parts of this program that work correctly with Win 98, ME, and XP. Not recommended for other tasks.

Appendix A: Links and Acknowledgements
Links

Dragon
http://www.uocm.de

Xuri's Worldbuilder
http://homefree.sensewave.com/~s107293/wb/

UOCopy, UOConvert, UOCoast, Transition, ItemPlacer, Cartograph
http://www.eikon.tum.de/~isp/sphere/doc_index.html

Worldforge Tutorial
http://homefree.sensewave.com/~s107293/ ... orial.html

Mr. Fixit's Multool and UOGateway
http://uogateway.com

Acknowledgements

Stormcrow: parts of the Dragon and DragonSP sections and modified scipts
Kirre: conversations about town building
Malec: Conversation about freezing statics
Xuri: WorldBuilder and WorldForge Tutorial
Mr. Fixit: MulTool

Appendix B: Dragon Script Definitions
(Taken from www.uocm.de)
Group.txt
The file Group.txt defines groups for the individual colors in your painted BMP. A group is the definition for the range of colors. For example the group Grass (00) is all colors from 00 to 0e. This is used later with the Maptrans.
Maptrans.txt
The file Maptrans.txt contains the converting information that converts the pixel color to tiles. The first 2 characters contain the tile group number from Groups.txt. The second set of 3 characters is the altitude for this tile group. This is followed by a list of Tile Ids that this group will randomly select from to place in the map.
Betweentrans.txt
The file Betweentrans defines which file to use in creating tile transitions. For this file it is done from X to Y. The first two sets of numbers define Group X then Group Y from the Groups.txt file. This is followed by the file containing the transition table.
For example:
04 03 Black2Dun.txt
This tells when going from Black tiles (04) to Dungeon tiles (03) use Black2Dun.txt for the transition table.
Betweentrans2.txt
This file also defines which file to use for transition calculations. However this is for Group X to X, or the same type of tile. The first number then is the tile group followed by the file to use to transition it. Group X is defined as "tile A" and all other Tiles except group X "tile B" in its related transition table file.
Statbetweentrans.txt
In this file the Statics is defined. This is again a group X to group Y relationship like Betweentrans.txt but for static tiles.
Statbetweentrans2.txt
Similar again to a group X to group X relationship but for statics also.
Statbetweentrans3.txt
Similar again to a group X to group X relationship but for statics also.

Sample code for Transition Tables
If you open the file "grass2mountain.txt " you should find something like this:

AAAABBBB 0238 005 007

The first value (the As and Bs) describe the order of the Tiles A (grass) and B (mountain) around the Tile A found by the program (which is the center tile), beginning with the Tile in the northwest and then in a clockwise direction up to the west. For example:

insert image

"With Dragon - AAAABBBB (ignoring the center tile)":

insert image

In our example (A - > grass - > green; B - > mountain - > grey):

insert image

If the program runs into this Tile configuration for transitions it would replace Tile A (the center tile). The second value in our above example (AAAABBBB 0238 005 007) - 0238 is the Tile ID that will replace this tile.
In order to find this ID, open " InsideUO " and open the Textures menu. Find the Tile ID that best represents what you are trying to accomplish and use its ID number. 0238 for our example:

insert image

The last two values in our example are height modifiers for our transition tile. These values take the original tile height and add a random number between the ones specified. For example in our scenario "005 007" if the original tile that is being replaced had a height of 10, the replacement tile would be set between 15 and 17. With "grass2mountain" this is quite important, so that the mountains flow gracefully into grass. In addition it is best to vary the altitude just a little. i.e. you take our transition tile, it is very close because the mountain is a larger height then the grass tiles, which are situated somewhat away from the mountain - so you need the transition tile to be between those heights so it flows well. In some cases though you do not have to adapt the height at all (ie. with edges of Dungeon) - simply use the values to " 0 0 "... for the height modifiers for it to have no change

In the same way you go through all the AABABBAA possibilities, looking for which Tile to use with InsideUO entering its ID and what height modifiers you may want.

Thanks to Wildmieze for the generation of this write-up.
And Amitiu for the English touch-up.


Note:
With Statics the program gets the highest Z from the surrounding Tiles looking 2 and 3 up in the source group and then adds the Z level.

Appendix C: Misc Info

*Copy and paste the color table into you new map (like down in the lower right corner) so when you convert the map, you can see exactly what each tile does.
*Unevenly.txt: Makes the terrian uneven. Comment out with "//" to not use.
To be covered:
*UOSir
*UOSP
*Patching map and statics
*DB2M
*UOX Terrain Tool


Top
 Profile  
 
 Post subject:
PostPosted: Mon Oct 03, 2005 5:06 pm 
Offline
Journeyman
Journeyman
User avatar

Joined: Fri Sep 30, 2005 12:26 pm
Posts: 75
trick with the mountain, use dissolve while doing the lasso and contractions, it will give it a more random look along the bottom of the mountain


Top
 Profile  
 
 Post subject:
PostPosted: Wed Oct 12, 2005 2:11 pm 
Offline
Master
Master
User avatar

Joined: Fri Oct 07, 2005 2:02 am
Posts: 246
Location: Russian Federation, Moscow
There are few tips. I think they can help to beginners and could noticed by experienced mapmakers...

-First i advice to consider your map. You must understand that installing a new map is a serious work and you will require a lot of time to get it perfectly. The truly new map means that it will require changing all titles, quests and a lot of thing that chain-linked with an old map, which you want to replace. Realize, that you will require doing a lot of work and after completing a new map.

-I advice to take a paper and pen and schematically draw your map on it before to draw a map in PSP. Locate cities, roads, dungeons and other main locations (you can add these places certainly during creation of the world, but it will considerably prolong process of fixing). So in the very process of drawing you will knew what to do.

-I have separate map classes to three variations: Natural, Dungeon and Supernatural (dimensional). Basically type of Natural map is standard OSI map (Sosaria). Basic tile is water (Ocean) with continents on it. Basically type of Dungeon map is Ilshenar as far as its basic tile is Black where a giant cave is located. Type of a Dimensional map is Malas. It has continents, floating endlessly space? to choose one of those variants is a first stage of landscape creation. Natural map is easiest to get produced, and easy to fill with all world elements, although it?s not really original and new. Dungeon map is a more conceptual idea, but require a little more detail work in drawing. Dimensional map is a combination of Natural Map freedom to landscape and Dungeon Map conceptuality, as it allows wide variants in landscape design and custom stuff, but it require to smart planning and knowledge to make look it perfect.

-In progress of your project do not forgot about where you will place monster spawns. If you?re planning to keep Champion Spawns working, you will require dungeons and sites to home them. Also, to make all of your monsters useful for gaming process, you should to create at least one site, where that monster will be located, to prevent a situation when you spend a days to complete your map and later wondering where to place an Ophidian fellows. So make a list of monsters, with that you want to inhabit a new map and sort them to dungeons and lands.

Hope it will not too weird written and my own translation is read-able. Add it if you like it. Thanks.

_________________
"Be calm and silent, as Darkness care not of passions and lies. Be patient and cold, as Darkness exists out of borders of time and emotions. Just be yourself, as You are in the Darkness and Darkness is inside of you."
-Dark Ones Doctrine, 2001y (c)-


Top
 Profile  
 
 Post subject:
PostPosted: Thu Apr 20, 2006 4:42 am 
Offline
Journeyman
Journeyman
User avatar

Joined: Sat May 08, 2004 1:59 am
Posts: 67
Location: Netherlands
Just to save others the hassle of having to search through the Chat forum:

The working of grassbumps changed. The new way of handling them (at least in Mod11) is to have different Z level grassbump next to eachother where you want the cliff look. Otherwise it will just create steep hills.

So 20z grass, 20z grassbump, 0z grassbump, 0z grass would give you a 20z, unwalkable cliff between the grassbumps.

Link back to original topic:
http://www.ryandor.com/forum/viewtopic. ... =grassbump

_________________
What is, is
What exsists, exists


Greetz
Planet_Jeroen


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 7 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group