Ryandor.com

Sorry for my bad bad bad Eng.

I have a problem with dragon 11.

i would like to make a new map of Ilshenar , but dragon 11 ...... do only map2.mul .....

dragon 11 produces only good map2 & bad ,but very bad ,statics or staidx!!!

it doesn't make :coasts, trees , jungles ecc. pls

help me!!!!
i don't know the problems of dragon 11 for map 2

For me Dragon 9 is very good for statics & map0.mul but with Dragon 9 i can't produce map2+statics.

If you want to replace Ilshenar its very simple.

First you make a normal sized map that will fit in the same area size of Ilshenar surrounded by water or stars.

After you are done compiling the map you use "UOCOPY" to extract that area out of the map and place it in the Ilshenar sized map.

DONE!

Most of the files needed are located on the download section of this site.

To answer your second question regarding the placement of statics on the map, did you run Dragon SP after you compiled the map with Dragon? If you did not, then that is the problem.

Dev

_________________
"So...if crazy people don't know their crazy...does that mean your only sane if your know your crazy?"

The Dragon mod 9, and Dragon mod 11 are only script differences. if you want the difference of the newer Dragon, change the Dragon.exe from your mod 11 folder, to the mod 9 folder, and run it.

_________________
Forget what you know, know what you forget.

OK THX now make .....

i have problems ... with DRagon 11 can make Map2.mul very easy but the statics???

i have produced a map with your method using Dragon9 but do many errors in the copy.

The map is cut in more segment.... pls help

That particular Dragon core does map 2 and 3.
The problem is that DragonSP was never updated to to do anything other than map0 so you have no way to freeze in the statics.

_________________
This space for rent.

Right, so your only best bet would to be like what Dev Viperrious said. Heres a more detailed How-To:

Start your map with the normal Map0.mul sized *.bmp file to paint. (6144 x 4096 )

Now when you paint your map2.mul map, *.bmp start your first top corner at x100, y100 and make a square x2304 x y1600. That is the size of Map2.mul. (leave the rest of the map black dungeon or water maybe)

Once done, run that through Dragon Mod## and generate your Map0.mul, statics0.mul, and staidx0.mul files.

Grab World Copy or UO Copy Map .. (cant remember which without searching for mine, and running them).
It will have an option to copy a section of your map0 and statics to another map file, like map2.mul

Set the size to copy 2304 x 1600 from the map0.mul, with offset 100, 100 (that is the tile/pixel on the map0 bmp you painted) to copy to the map2.mul and include statics.

Its that easy, your done.

Im going off of memory from the last time I used it heavy was well over a year ago.. but I think its all correct.

_________________
Forget what you know, know what you forget.

Oh, then he probably has the wrong uocopy like last time. Someone dredge up the old thread.

_________________
This space for rent.